5 Ways to Ensure Playground Safety
Once the summer winds down and school starts up again, you can be sure that your schoolís playground will be in full use. Ensuring that your schoolís playground is in sync with safety standards should be a top priority before the start of the school year for obvious reasons. Unfortunately, over 20,000 children each year sustain some sort of injury on a playground. Although playground injuries are inevitable, there are plenty of measures that can be taken to minimize them.
1. Check your playground regularly.
It is always a good idea to check your playground on a regular basis. This doesnít mean that you have to devote hours each week to it, but a quick check at the end of the day goes a long way. Itís also a good idea to give your playground a thorough check at the end of each week. Pull on the equipment and bang it around a little to make sure that everything is bolted in place and there are no loose ends. If you find something that seems out of the ordinary, donít hesitate to fix it right away.
2. Get a certified Safety Playground Inspection.
This is related to the first tip, but takes it a step further. Since you are not an expert, the wise thing to do is to have an expert come to your schoolís playground once a year and perform a certified playground inspection. You may think that a playground inspection is just another expense, but it is a measure that can prevent a major headache and financial consequences. A certified playground inspector will thoroughly check every inch of your playground and provide your organization with a detailed report.
3. Make sure there is adequate surfacing.
While you may naturally focus first on the equipment, donít forget about the surfacing underneath. Even if the equipment is up to par, kids sometimes fall on the ground. Itís just part of being a kid, so it is best to be prepared for those falls. Make sure that your playground has at least 8 inches of mulch, wood chips or certified Poured-in-Place surfacing. Certified Engineered Wood Fiber is a form of mulch that has become popular with many schools in recent years. You should also make sure that surfacing extends at least 6 feet outward from each playground structure. If there is a very high structure, you might want to consider 10 feet.
4. Have proper spacing between play structures.
Spacing is one of the keys to ensuring playground safety. If you have guard rails or protective borders around your playground structures, make sure there is adequate space between the structure and the railing or bordering. You also want to have at least 3 to 5 feet of space between each play structure. Having too many play structures cramped into a small space is never a good idea. You want to create a clear space in between structures that easily allows for a clean impact on the surfacing below.
5. Make sure children are using the appropriate equipment for their age group.
This might seem like a no-brainer, but it is one that is easily overlooked and the reality is that you might be too busy sometimes to make sure that each child is playing on the appropriate equipment according to his or her age group. However, making sure that children are using the right equipment for their age will go a long way in preventing injuries. Although playgrounds are often designed for multiple age groups, younger children are more prone to injury on certain equipment that might be better suited for 10 or 12-year-olds.
Following the five tips mentioned above should help improve the safety of your playground. The main thing really is to consistently check the play structures and the areas around it.
This information is courtesy of MD Materials, which offers a full range of commercial playground equipment, area borders, shade structures, sandbox covers and site amenities, www.mdmaterials.com.